TSPROF Alpha are unique rubber-bonded diamond stones that perform incredibly cleanly. Through extensive experimentation, we achieved the perfect combination of bonding agent and optimal abrasive particle concentration. As a result, TSPROF Alpha stones perform exceptionally cleanly and boast exceptional wear resistance.
TSPROF Alpha diamond stones easily handle any steel with a hardness of up to 70 HRC.
Each stone undergoes meticulous preparation and requires no opening, ensuring minimal thickness variations of ±0.1 mm.
For secure retention in the abrasive holder, TSPROF Alpha stones are bonded to an aluminum blank with 45° bevels. The blanks are red anodized*.
The stones are individually packaged in blister packs.
The set includes the following stones:
TSPROF Alpha 40/28 (360 grit) is designed for basic sharpening of the cutting edge.
TSPROF Alpha 20/14 (1000 grit) is designed for basic sharpening of the cutting edge.
TSPROF Alpha 10/7 (2000 grit) is designed for pre-finishing of the cutting edge.
TSPROF Alpha 5/3 (5000 grit) is designed for finishing cutting edges.
TSPROF Alpha 2/1 (11000 grit) is designed for finishing and polishing cutting edges.
Specifications:
Length: 150 mm
Width: 25 mm
Thickness: 3 mm ± 0.15 mm
Bond: Rubber
Blank Size:
Length: 160 ± 2 mm
Width: 25 ± 1 mm
Thickness: 3 ± 0.2 mm
Due to manufacturing processes, the width and length of the abrasive may vary by up to 5% from the values specified in the description.
*Due to the anodizing process, blank shades may vary slightly.
Instructions for use: TSPROF sharpening oil is recommended.
Caution! Handle the stones with care: do not apply pressure to the abrasive during sharpening (especially when sharpening the tip/edge of the knife), and do not allow the stone to slip off the blade's plane or fall onto a hard surface.
