New

Set of diamond bars for sharpening systems, mounted on colored anodized aluminum plates measuring 150 × 25 × 7 × 3, bonded with MS-1 (copper-tin) ...

Set of 150x25x7x3 bars on MS1 colored plates (100%), in a box for 4 bars (AC6 100/80, AC6 50/40, ACM 20/14, ACM 7/5) This set contains:100/80 (150...

TSPROF K4 "Scout" Sharpening KitLimited edition. Only 20 kits. Free shipping worldwide* When on a reconnaissance mission, don't take unnecessary i...

Double-sided diamond block for polishing cutting edges. For manual sharpening. The abrasive stone contains no boron carbide, which allows grindin...

Set of diamond stones for sharpening systems on colored anodized aluminum plates measuring 150×12×6×2, mounted on MS-1 (copper-tin) bonds with 100...

This kit is suitable for charging wood, cast iron, copper, bronze, and other lapping surfaces with diamond and other pastes and powders.The set inc...

Ball-shaped handle for the Profile K03 abrasive holder. A joint project by TSPROF and CrazyFiber. Crafted with care from CrazyFiber’s unique, propr...

A double-sided foldable diamond sharpening stone is a great solution for hiking, urban settings, and home use. Want to keep your knife sharp at all...

Set of 5 Alpha Diamond Sharpening Stones (240 - 9000 Mesh grit) TSPROF Alpha — are unique resin bonded diamond stones with a very smooth surface p...

Custom ball-handle for K03 abrasive holder This ball handle for the K03 abrasive holder is a collaboration between TSPROF and CrazyFiber. Suitable...

Custom ball-handle for abrasive holder This ball handle for the abrasive holder is a collaboration between TSPROF and CrazyFiber. Suitable for the...

TSPROF Alpha are unique rubber-bonded diamond stones that perform incredibly cleanly. Through extensive experimentation, we achieved the perfect co...

200х83,4х10х1х1  AC4 ― AC4  160/125 ― 50/40   B2-01 ― B1-10   100%   147,2 carats

The TSPROF abrasive holder with a carbon guide  is a professional solution for precise and consistent sharpening of tools in TSPROF systems. The c...

Accommodates one fully assembled charging roller and two additional roller cylinders. Ensures the protection of the working surfaces of the roller ...

A ball handle for a 6 mm abrasive holder (TSPROF Pioneer, TSPROF Kadet, TSPROF Blitz). A joint project by TSPROF and CrazyFiber. Carefully crafted ...

The roller is designed for the even distribution of abrasive paste and the embedding of abrasive particles into the working surface of a lap. Charg...

Replacement cylinder for the TSPROF charging roller. The cylinder is designed to be installed on the charging roller. It is used for working with a...

Replacement cylinder for the TSPROF charging roller. The cylinder is designed to be installed on the charging roller. It is used for working with a...

The 150×25×7×3 mm 160/125 MS-1 diamond bar with 100% copper-tin bonding is the ideal solution for anyone who values quality and reliability. With i...

Stabicap Ball Handle for the Profil Abrasive Holder. Stabicap is stabilized maple—wood impregnated with a polymer compound. The manufacturing proce...

Double-sided diamond block for honing and polishing cutting edges. The modified abrasive layers are bonded to an aluminum sheet; the bar does not...

The 3/2-1/0 grit is designed for polishing cutting edges. This stone is suitable for those who prefer an aggressive cut. Venevsky diamond stones ...

The diamond sharpening stone from the Venevsky Plant is the ideal solution for precision knife sharpening. With it, you can easily bring the cutti...

This diamond stone is the ideal solution for anyone who values quality and reliability. With it, you can easily remove chips from the cutting edge...

This case is suitable for bars in the following sizes: 150×25×7, 150×25×6, and 150×20×6

Universal clamp holder for diamond bars up to 20 cm long. Equipped with silicone fasteners that offer strong, reusable adhesion.  

150×25×6×3  3/2 (9000 grit) OMK  OMK bond. A diamond stone with an organometallic bond containing silicon carbide  A new bonding system develope...

150×25×6×3  7/5 (3000 grit) OMK OMK bond. A diamond bar with an organometallic bond containing silicon carbide  A new bonding system developed b...

150×25×6×3  14/10 OMK  OMK bond. A diamond bar with an organometallic bond containing silicon carbide  A new bonding system developed by engineer...

150×25×6×3  20/14(1000 grit) OMK  OMK bond. A diamond bar with an organometallic bond containing silicon carbide  A new bonding system developed...

150×25×6×3  160/125 OMK  OMK bond. A diamond bar with an organometallic bond containing silicon carbide  A new bonding system developed by engin...

Engineers at the Venevsky Factory have developed a fine-grain 3/2 MB-1(MS-1) metal bond. The primary binding metals are copper and tin. The sinter...

150×25×6×3  100/80 OMK  OMK bond. A diamond bar with an organometallic bond containing silicon carbide  A new bonding system developed by engine...

Engineers at the Venevsky Factory have developed a fine-grain 5/3 MB-1(MS-1) metal bond. The primary binding metals are copper and tin. The sinter...

The new metal bond in Venevsky MS-1 grinding rods consists of the following components: copper, tin, diamond, plus a silicon carbide filler with a...

The new metal bond in Venevsky MS-1 grinding rods consists of the following components:copper, tin, diamond, plus a silicon carbide filler with a ...

The new metal bond in Venevsky MS-1 grinding rods consists of the following components: copper, tin, diamond, plus a silicon carbide filler with a...

The new metal bond in Venevsky MS-1 grinding rods consists of the following components:copper, tin, diamond, plus a silicon carbide filler with a ...

The new metal bond in Venevsky MS-1 grinding rods consists of the following components: copper, tin, diamond, plus a silicon carbide filler with a...

The new metal bond in Venevsky MS-1 grinding rods consists of the following components: copper, tin, diamond, plus a silicon carbide filler with a...

Diamond stone, 150 × 25 × 7 × 3 mm, 50/40 MS-1, 100% 50 caratsThe new metal bond in Venevsky MS-1 grinding rods consists of the following componen...

150×25×7×3 AS6 63/50 MS1 100% 50 carats The new MS-1 Venevsky bar bond consists of the following components: copper, tin, diamond, plus a silicon c...

150×25×7×3 AS6 80/63 MS1 100% 50 caratsThe new metal bond in Venevsky MS-1 grinding rods consists of the following components: copper, tin, diamond...

Achieve unmatched precision and efficiency with this single-sided diamond sharpening bar for cutting edges. This innovative tool ensures fast and f...

Get perfectly sharpened knives with our 150×25×7×3 mm 125/100 MS-1 diamond sharpening bar (100% copper-tin). Thanks to its high abrasive concentrat...