All

The diamond sharpening stone from the Venevsky Plant is the ideal solution for precision knife sharpening. With it, you can easily bring the cutti...

The 3/2-1/0 grit is designed for polishing cutting edges. This stone is suitable for those who prefer an aggressive cut. Venevsky diamond stones ...

200х83,4х10х1х1  AC4 ― AC4  160/125 ― 50/40   B2-01 ― B1-10   100%   147,2 carats

Double-sided diamond block for honing and polishing cutting edges. The modified abrasive layers are bonded to an aluminum sheet; the bar does not...

200×83.4×10×1×1  ACM ― ACM  20/14 ― 7/5  B2-01 ― OSB   100%   147.2 carats Every knife loses its sharpness over time. To minimize this, you need t...

150×25×6×3  40/28 OMK  OMK bond. A diamond bar with an organometallic bond containing silicon carbide  A new bonding system developed by enginee...

150×25×6×3  50/40 OMK  OMK bond. A diamond stone with an organometallic bond containing silicon carbide  A new bonding system developed by engin...

150×25×6×3  100/80 OMK  OMK bond. A diamond bar with an organometallic bond containing silicon carbide  A new bonding system developed by engine...

150×25×6×3  160/125 OMK  OMK bond. A diamond bar with an organometallic bond containing silicon carbide  A new bonding system developed by engin...

Engineers at the Venevsky Factory have developed a fine-grain 3/2 MB-1(MS-1) metal bond. The primary binding metals are copper and tin. The sinter...

Engineers at the Venevsky Factory have developed a fine-grain 5/3 MB-1(MS-1) metal bond. The primary binding metals are copper and tin. The sinter...

The new metal bond in Venevsky MS-1 grinding rods consists of the following components: copper, tin, diamond, plus a silicon carbide filler with a...

The new metal bond in Venevsky MS-1 grinding rods consists of the following components:copper, tin, diamond, plus a silicon carbide filler with a ...

The new metal bond in Venevsky MS-1 grinding rods consists of the following components: copper, tin, diamond, plus a silicon carbide filler with a...

The new metal bond in Venevsky MS-1 grinding rods consists of the following components:copper, tin, diamond, plus a silicon carbide filler with a ...

The new metal bond in Venevsky MS-1 grinding rods consists of the following components: copper, tin, diamond, plus a silicon carbide filler with a...

The new metal bond in Venevsky MS-1 grinding rods consists of the following components: copper, tin, diamond, plus a silicon carbide filler with a...

Diamond stone, 150 × 25 × 7 × 3 mm, 50/40 MS-1, 100% 50 caratsThe new metal bond in Venevsky MS-1 grinding rods consists of the following componen...

150×25×7×3 AS6 63/50 MS1 100% 50 carats The new MS-1 Venevsky bar bond consists of the following components: copper, tin, diamond, plus a silicon c...

150×25×7×3 AS6 80/63 MS1 100% 50 caratsThe new metal bond in Venevsky MS-1 grinding rods consists of the following components: copper, tin, diamond...

Achieve unmatched precision and efficiency with this single-sided diamond sharpening bar for cutting edges. This innovative tool ensures fast and f...

A double-sided foldable diamond sharpening stone is a great solution for hiking, urban settings, and home use. Want to keep your knife sharp at all...

Set of 150x25x7x3 bars on MS1 colored plates (100%), in a box for 4 bars (AC6 100/80, AC6 50/40, ACM 20/14, ACM 7/5) This set contains:100/80 (150...

Double-sided diamond block for polishing cutting edges. For manual sharpening. The abrasive stone contains no boron carbide, which allows grindin...

We present to you the TSPROF K4 rack and pinion lift. Its design allows you to set the sharpening angle easier, faster, and more accurately. The lo...

TSPROF Alpha are unique rubber-bonded diamond stones that perform incredibly cleanly. Through extensive experimentation, we achieved the perfect co...

We are pleased to present the TSPROF impact-resistant, watertight plastic case. The TSPROF impact-resistant case is a versatile accessory designed...

Full set of Japanese NANIWA Chosera Wetstones for TSPROF A professional set of Japanese water stones NANIWA Chosera, selected specifically for T...

- Material: 65G steel, ground, heat-treated;- Thickness: 1 mm (standard 0.8 mm);- Load on abrasive, without deviations: 1 kg (standard 0.5 kg);

Designed for finishing, polishing, and deburring. A wooden strop can be used as is for deburring or loaded with diamond pastes for finishing. To f...

TSPROF Double clamps are adjustable to any shape of the blade. Work with K4, K03, Kadet, and Pioneer sharpeners. For long, thin or small blades Th...

Three-layer diamond coated bars. This set is designed for roughing and is made on a galvanic bond. Diamond coated bars are more aggressive than or...

TSPROF branded sticker pack — «Knife Rider» Made on a matte self-adhesive paper. Stickers do not require cutting and have a notch along the edge...

Suitable for:All K03 KitsNot suitable for:All Blitz/Blitz 360/Blitz Pro kitsAll Kadet/ Kadet Pro kitsAll K03 Pro kits The sharpening angle extende...

TSPROF silicone knife mat is designed to keep the workplace clean during knife sharpening, as well as during assembly and disassembly (maintenance...

The whole-milled clamps are made of high-strength aircraft-grade aluminum and coated with wear-resistant Cerakote® polymer-ceramic coating. They a...

The whole-milled clamps are made of high-strength aircraft-grade aluminum and coated with wear-resistant Cerakote® polymer-ceramic coating. They a...

The whole-milled clamps are made of high-strength aircraft-grade aluminum and coated with wear-resistant Cerakote® polymer-ceramic coating. They a...

The whole-milled clamps are made of high-strength aircraft-grade aluminum and coated with wear-resistant Cerakote® polymer-ceramic coating. They a...

The whole-milled clamps are made of high-strength aircraft-grade aluminum and coated with wear-resistant Cerakote® polymer-ceramic coating. They a...

The whole-milled clamps are made of high-strength aircraft-grade aluminum and coated with wear-resistant Cerakote® polymer-ceramic coating. They a...

The whole-milled clamps are made of high-strength aircraft-grade aluminum and coated with wear-resistant Cerakote® polymer-ceramic coating. They a...

The whole-milled clamps are made of high-strength aircraft-grade aluminum and coated with wear-resistant Cerakote® polymer-ceramic coating. They a...

The whole-milled clamps are made of high-strength aircraft-grade aluminum and coated with wear-resistant Cerakote® polymer-ceramic coating. They a...

Hexagonal screwdriver TSPROF, 4.0 mm (150 mm) The key is made of high-alloy steel, with subsequent heat treatment and grinding of working surfaces...

Hexagonal screwdriver TSPROF, 2.5 mm (150 mm) The key is made of high-alloy steel, with subsequent heat treatment and grinding of working surfaces...

Hexagonal screwdriver TSPROF, 2.0 mm (150 mm) The key is made of high-alloy steel, with subsequent heat treatment and grinding of the working sur...