{"product_id":"tsprof-f600-fine-diamond-plate","title":"TSPROF F600 Fine Diamond Plate","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eDiamond plate TSPROF F600 Fine\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003eElectroplated diamond plates provide intensive metal removal and can be used for knife cutting edges with significant damage (chips, gouges, etc.).\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond plate F600 Fine is used for pre-finishing of the cutting edge, removes noticeable risks from sharpening.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eWork noticeably more aggressive than bars on organic and metal bonds with a similar grain size. This is achieved due to protruding diamond grains, while in metal and organic bonds diamond grains are recessed in the binder and mixed with it. The grain size concentration in the layer is 100%. At the same time, it should be noted that such stones will be inferior to other bonded stones in terms of work duration due to the thin layer of sputtering, which is actively erased in the process of sharpening.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eIt is also important to take into account that when working with such diamonds on soft steels, hardness up to 58 HRC, this type of bars is produced faster than when working on steels with high hardness.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eElectroplated diamond plates do not require preparation for work (leveling, \"cheering up\", etc.).\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive size: 4x25x150 mm\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eGritGrit: 600 grit (FEPA-F)\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBecause of production peculiarities, the width and length of the abrasive may deviate from the values specified in the description by up to 5%.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSignificant stains on the surface of the abrasive may occur, not affecting operation.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eRecommendations for use: the plates work without the use of coolants and water.\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eWarning! Bar requires careful work: do not press on the abrasive during sharpening (especially when sharpening the tip\/ankle of the knife), do not allow to break off the plane of the blade and fall the bar on a hard surface.\u003c\/h4\u003e\n\u003cp style=\"text-align: center;\"\u003eTechnostudio Profile:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\"Galvanic bonding is a method of sputtering in which diamond particles are attached to a coated base and a layer of metallic bonding is deposited from an electrolyte, covering and fixing the diamond grains. The method makes it possible to obtain diamond-containing coatings on complex shaped surfaces and to create thin (up to 0.4 mm) diamond-containing elements and coatings. Galvanic binder is characterized by the fact that it holds diamond grains only due to mechanical forces of adhesion, so the grains should be overgrown with binder to a height of at least 65-70% of the grain size. The metal that securely holds the abrasive grain on the steel body is nickel. It gives the tool high strength, durability and performance.\"\u003c\/p\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894192529579,"sku":"TS-SH1900630","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/d9b3def2_08b2_11ed_a426_0025903372b9_06b42b07_7552_11ed_a440_0025903372b9.webp?v=1764216202","url":"https:\/\/tsprof.asia\/products\/tsprof-f600-fine-diamond-plate","provider":"TSPROF Asia","version":"1.0","type":"link"}