{"title":"Other Diamond Stones","description":"\u003cp\u003eIn this collection you can find various diamond stones.\u003c\/p\u003e","products":[{"product_id":"ms-1-set-of-single-single-sided-diamond-sharpening-stones-ms-1-5-pcs","title":"6\" in. Venev MS-1 Set Of One-Sided Diamond Sharpening Stones (5 pcs)","description":"\u003c!-- more --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eVenev MS-1 one-sided metal bonded diamond sharpening stones\u003c\/h2\u003e\n\u003cp\u003eSet of Venev metal bonded diamond sharpening stones (copper-tin, MS-1). The \u003cstrong\u003ediamond volume content of each stone is 100%\u003c\/strong\u003e, evenly distributed throughout the entire stone volume. The abrasive working layer is 4 mm.\u003c\/p\u003e\n\u003cp\u003eThe bond contains diamond powder, copper, tin, and silicon carbide filler. The stones are designed for sharpening knives made of \u003cstrong\u003eany steel with hardness up to 70 HRC\u003c\/strong\u003e. \u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eSet of 5 stones of various grit\u003c\/h2\u003e\n\u003cp\u003eThe stones are marked with a GOST grit standard. The included grits allow a complete knife sharpening - from profiling to finishing:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGOST \u003cstrong\u003e200\/160 (80 Mesh)\u003c\/strong\u003e grit - for profiling (setting a blade grind) and initial sharpening.\u003c\/li\u003e\n\u003cli\u003eGOST \u003cstrong\u003e100\/80 (170 Mesh)\u003c\/strong\u003e grit - for profiling and coarse sharpening.\u003c\/li\u003e\n\u003cli\u003eGOST \u003cstrong\u003e50\/40 (350 Mesh)\u003c\/strong\u003e grit - for main sharpening.\u003c\/li\u003e\n\u003cli\u003eGOST \u003cstrong\u003e20\/14 (900 Mesh)\u003c\/strong\u003e grit - for main sharpening.\u003c\/li\u003e\n\u003cli\u003eGOST \u003cstrong\u003e7\/5 (3000 Mesh)\u003c\/strong\u003e grit - for finishing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"text-align: center;\"\u003eSpecifications:\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"width: 49.6908%; height: 19.5833px;\"\u003eLength\u003c\/td\u003e\n\u003ctd style=\"width: 50.0239%; height: 19.5833px;\"\u003e150 mm \/ 6\" in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"width: 49.6908%; height: 19.5833px;\"\u003eWidth\u003c\/td\u003e\n\u003ctd style=\"width: 50.0239%; height: 19.5833px;\"\u003e25 mm \/ 1\" in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"width: 49.6908%; height: 19.5833px;\"\u003eThickness\u003c\/td\u003e\n\u003ctd style=\"width: 50.0239%; height: 19.5833px;\"\u003e7 mm \/ 0.28\" in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"width: 49.6908%; height: 19.5833px;\"\u003eBonding agent\u003c\/td\u003e\n\u003ctd style=\"width: 50.0239%; height: 19.5833px;\"\u003eMS-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"width: 49.6908%; height: 19.5833px;\"\u003eWork with\u003c\/td\u003e\n\u003ctd style=\"width: 50.0239%; height: 19.5833px;\"\u003eOil, dry use possible.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDue to the nature of production, the width and length of the abrasive may deviate from the values specified in the description by up to 5%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAttention\u003c\/strong\u003e! These sharpening stones require careful handling: do not press down on the abrasive during sharpening (especially when sharpening the tip\/point of the knife), do not allow the stone to come off the blade, and do not drop them on hard surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/naFeexVACcs?si=hDduCKJsBoAKAH_x\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/_27jce9ATaQ?si=581j8lQczEmeE6ni\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45857378009259,"sku":"TS-SH2201790","price":368.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/MS-1-1.jpg?v=1763534006"},{"product_id":"venev-double-sided-diamond-sharpening-stone-6-s-10-7-5-3-osb-100","title":"Venev Double Sided Diamond Sharpening Stone, 6\", (S), 10\/7-5\/3 (OSB), 100%","description":"\u003c!-- more --\u003e\n\u003ch2 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003eVenev 10\/7 - 5\/3 Double Sided Diamond Bar\u003c\/h2\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eMade by Venev Industrial Diamonds Inc. Unlike other abrasive stones, diamond bars have a much slower wear rate, so using them with hard steels is recommended.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e6\" Stone Format - Works With Blitz, Kadet, Pioneer, K03\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis 6\" long diamond bar can be used with all TSPROF and other sharpeners.  \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eGOST 10\/7 = FEPA F 700 | GOST 5\/3 = FEPA F 1100\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eBoth sides are manufactured using the new upgraded OSB binder. This binder differs from others in that it does not use boron carbide. In addition, the abrasive layer here is not sintered, but glued to the body of the metal plate. The absence of unnecessary inclusions of other abrasives allows softer and finer work. OSB bond is ideal for hard steel on low angles.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpecifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cb data-mce-fragment=\"1\"\u003eSize\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e: \u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-mce-fragment=\"1\"\u003e150x24x11 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003e1st side\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-mce-fragment=\"1\"\u003e10\/7 microns \/ F700 grit\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cb data-mce-fragment=\"1\"\u003e2nd side\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e: \u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-mce-fragment=\"1\"\u003e5\/3 microns \/ F1100 grit\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cb data-mce-fragment=\"1\"\u003eDiamond powder concentration:\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-mce-fragment=\"1\"\u003e100%\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cb data-mce-fragment=\"1\"\u003eDiamond layer thickness:\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-mce-fragment=\"1\"\u003e3 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e\n\u003cp\u003eDue to production peculiarities, the width and length of the abrasive may deviate from the values specified in the description by up to 5%. \u003c\/p\u003e\n\u003cp\u003eRecommendations for work:\u003c\/p\u003e\n\u003cp\u003eUse soapy water or oil. Working with oil keeps the process cleaner.\u003c\/p\u003e\n\u003cp\u003eWarning. These bars require careful work: do not apply pressure on the abrasive during sharpening (especially when sharpening the tip of the knife), do not allow the abrasive to come off the blade and do not allow the bar to fall on hard surfaces. \u003c\/p\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45857378861227,"sku":"TS-SH2201500","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/TS-SH2201500_1.jpg?v=1763534033"},{"product_id":"set-of-rectangular-diamond-plates-on-blanks-5-pcs","title":"Set Of Diamond Plates On Blanks (5 Pcs)","description":"\u003c!-- more --\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eDiamond plates made with a galvanic bonding agent provide \u003c\/span\u003e\u003cb data-mce-fragment=\"1\"\u003eintensive metal removal\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e and can be used for the cutting edge with significant damage (chips, bends, etc.).\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eThe set of diamond plates on blanks includes\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e— F150 \u003c\/span\u003e\u003cb data-mce-fragment=\"1\"\u003eExtra Coarse\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e diamond plate is used for roughing of the edge and forming the shape of the blade.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e— F220 \u003c\/span\u003e\u003cb data-mce-fragment=\"1\"\u003eCoarse\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e diamond plate is used for shaping the cutting edge.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e— F400 \u003c\/span\u003e\u003cb data-mce-fragment=\"1\"\u003eMedium\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e diamond plate is used for main sharpening operations and creating of the aggressive\/biting cut.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e— F600 \u003c\/span\u003e\u003cb data-mce-fragment=\"1\"\u003eFine\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003ediamond plate is used for pre-finishing of the cutting edge and removing noticeable scratches.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e— F1000 \u003c\/span\u003e\u003cb data-mce-fragment=\"1\"\u003eVery\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cb data-mce-fragment=\"1\"\u003eFine\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003ediamond plate is used for finishing the cutting edge.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThese abrasives are much more aggressive than stones on organic or metallic bonding agents with the same grain size. It is achieved due to the protruding diamond grains, whereas grains of the organic or metallic bond get stuck in the binder and mixed with it. The grain concentration in a layer is 100%. At the same time, it should be noted that in terms of the duration of work, such plates will be inferior to plates on other bonds due to a thin layer of spraying, which is actively erased during the sharpening process.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePlease bear in mind, if you work with soft steels (up to 58 HRC) these diamond stones will work out faster than if you use them for harder steels.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDiamond stones made with a galvanic bonding agent do not require preparing for work (leveling, \"cheering up\" etc.).\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eAbrasive dimensions\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e: 4х25х150 mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eGrit range\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e— 150 grit (FEPA-F)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e— 220 grit (FEPA-F)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e— 400 grit (FEPA-F)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e— 600 grit (FEPA-F)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e— 1000 grit (FEPA-F)\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/iYYePArJq7M\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45857381351595,"sku":"TS-SH2000740","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/8694b205cf432d4845cdee7c0d5ca7f4.jpg?v=1763534109"},{"product_id":"double-sided-diamond-bar-160-125-20-14-100-professional-knife-sharpening","title":"Venev Double-sided Diamond Sharpening Stone, 8\", 160\/125 - 20\/14, 100% Diamond Concentration","description":"\u003c!-- more --\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eDiamond stones\u003c\/strong\u003e are manufactured by the diamond tools factory \u003cstrong\u003eVenev\u003c\/strong\u003e \u003cstrong\u003eIndustrial Diamonds Inc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCompared to common abrasive stones, diamond bars have better wear resistance. Therefore they are best for sharpening hard steels. The sides are marked with a grit value according to the State Standard (GOST) scale. Sharpening with diamond stones does not require oil - you can moisten the surface with water. This diamond bar has a 100% concentration of diamond grains; this allows you to quickly and efficiently do roughing and first sharpening stages.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 200x35x10 mm\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e1st side Grit:\u003c\/strong\u003e 160-125 (GOST scale) = F100 FEPA-F\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e2nd side Grit: \u003c\/strong\u003e20-14 (GOST scale) = F400 FEPA-F\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eThe concentration of diamond powder: 100%\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eWork recommendations\u003c\/strong\u003e: use soap solution or water during sharpening. If your diamond bar gets clogged, use water and a brush to clean it. Align the bar on the glass surface using silicon carbide powder, and use diamond paste for finishing. \u003c\/p\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45857381417131,"sku":"TS-SH1800510","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/641d86dc82fae626e174d0f0ea2ad8ad.jpg?v=1763534110"},{"product_id":"double-sided-diamond-bar-160-125-100-80-100-premium-quality-kitchen-knives-sharpeners","title":"Double-sided Diamond Bar 160\/125-100\/80 100% (Premium Quality) Kitchen Knives Sharpeners","description":"\u003c!-- more --\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eDouble-sided diamond bar of the \u003cstrong\u003eVenevsky Diamond\u003c\/strong\u003e Plant of the premium series on a flat aluminum plate. The abrasive layer on this plate does not sinter but sticks to the plate body. Already out of the box, this a bar is ready for use; it does not require alignment on silicon carbide.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe bar is suitable for basic sharpening.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSide 160\/125\u003c\/strong\u003e is made on an organic bond B2-01. Organic ligament consists of phenol-formaldehyde resins and various compositions based on them. Which, during hot pressing, are Bakelized into a solid and sufficiently strong substance that holds the cutting grains in the working layer of the tool. Moreover, such a bundle will be sufficiently strong and vicious, but not rigid enough. To give it rigidity, abrasive grinding powders, such as boron carbide, are added.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSide 100\/80\u003c\/strong\u003e is made on the new upgraded OSB bundle. The difference between the OSB bundle and the others is that it does not use boron carbide. In addition, the abrasive layer on it does not sinter but sticks to the body of the metal plate. The absence of extra impregnations of other abrasives makes it possible to do softer and finer work. Already out of the box, such a bar is ready for use; it does not require alignment on silicon carbide. The OSB bond is ideal for hard steels at small angles.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eStone size:\u003c\/strong\u003e 200x35x12 mm.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eGrittiness 1\u003c\/strong\u003e: 160\/125 microns.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eGuinness 2:\u003c\/strong\u003e  100\/80 microns.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eDiamond Powder Concentration: 100%\u003c\/strong\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45857381449899,"sku":"TS-SH2000680","price":116.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/150a2b8b0714663d393afb39d29762c2.jpg?v=1763534111"},{"product_id":"double-sided-diamond-bar-50-40-20-14-100-premium-knife-sharpener","title":"Double-sided Diamond Bar 50 \/ 40-20 \/ 14 100% (Premium) Knife Sharpener","description":"\u003c!-- more --\u003e \u003cspan data-mce-fragment=\"1\"\u003eDouble-sided diamond bar of the \u003cstrong\u003eVenevsky Diamond\u003c\/strong\u003e Plant of the premium series on a flat aluminum plate. The abrasive layer on this plate does not sinter but sticks to the plate body. Already out of the box, such a bar is ready for use; it does not require alignment on silicon carbide.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe bar is suitable for basic sharpening.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSide 50\/40\u003c\/strong\u003e is made on an organic linkage B2-01. Organic ligament consists of phenol-formaldehyde resins and various compositions based on them. Which, during hot pressing, are Bakelized into a solid and sufficiently strong substance that holds the cutting grains in the working layer of the tool. Moreover, such a bundle will be sufficiently strong and vicious, but not rigid enough. To give it rigidity, abrasive grinding powders, such as boron carbide, are added.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSide 20\/14\u003c\/strong\u003e is made on the new upgraded OSB bundle. The difference between the OSB bundle and the others is that it does not use boron carbide. In addition, the abrasive layer on it does not sinter but sticks to the body of the metal plate. The absence of extra impregnations of other abrasives makes it possible to do softer and finer work. Already out of the box, such a bar is ready for use; it does not require alignment on silicon carbide. The OSB bond is ideal for hard steels at small angles.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eStone size:\u003c\/strong\u003e 200x35x12 mm.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eGrit 1:\u003c\/strong\u003e 50\/40 microns.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eGrit 2:\u003c\/strong\u003e 20\/14 microns.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eDiamond Powder Concentration: 100%\u003c\/strong\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45857381482667,"sku":"TS-SH2000690","price":125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/8ab39f6b0b66558dadb13635b72722e7.jpg?v=1763534112"},{"product_id":"double-sided-diamond-bar-3-2-1-0-100-osb-professional-chef-knife-sharpening","title":"Double-sided Diamond Bar 3 \/ 2-1 \/ 0 100% (OSB) Professional Chef Knife Sharpening","description":"\u003c!-- more --\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eThe bar of the \u003cstrong\u003eVenevsky Diamond\u003c\/strong\u003e Plant is made on the new modernized OSB bond. The difference between the OSB bond and the others is that it does not use boron carbide. The abrasive layer on it does not sinter but sticks to the body of the metal plate. The absence of extra impregnations of other abrasives makes it possible to do softer and finer work. The bar is ready for use out of the box; it does not require alignment on silicon carbide. The OSB bond is ideal for hard steels and small sharpening angles.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDesigned for finishing sharpening.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eStone size\u003c\/strong\u003e: 200x35x10 mm.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eGrit 1:\u003c\/strong\u003e 3\/2 microns.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eGrit 2:\u003c\/strong\u003e 1\/0 microns.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eDiamond Powder Concentration:\u003c\/strong\u003e 100%\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eRecommendations for work:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWorks with soapy water as well as with oil. The manufacturer recommends working with water or soapy water, but working with oil gives an excellent result without leaving a large amount of aqueous suspension.\u003c\/span\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45857381515435,"sku":"TS-SH2000800","price":71.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/62c88b47867ae0a754934add83789f8e.jpg?v=1763534113"},{"product_id":"set-of-diamond-bars-with-a-three-layer-coating-4pcs","title":"3-Layer Diamond Coated Bars For Reprofiling, 6\", (4 pcs)","description":"\u003c!-- more --\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eThree-layer diamond coated bars\u003c\/strong\u003e. This set is designed for roughing and is made on a galvanic bond.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDiamond coated bars are more aggressive than organic and metal bonded diamonds, they \u003cstrong\u003eprovide intensive removal of metal\u003c\/strong\u003e and can be used for the cutting edge of a knife that has significant damage (chips, cracks, rolled over edge parts, e.t.c.). That is due to the fact that diamond coated grits are sticking out from the surface, while metal and organic bonded diamond grits are mixed with the bonding agent.\u003c\/p\u003e\n\u003csection data-mce-fragment=\"1\"\u003e\u003c\/section\u003e\n\u003cp\u003eEach bar has three diamond layers. The concentration of diamonds in a layer is 100%. Each side has the same grit size and can be used for sharpening.\u003c\/p\u003e\n\u003cp\u003eYou do not need to flatten\/level these diamond bars.\u003c\/p\u003e\n\u003cp\u003eThis set of diamond bars comes in a nylon case.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e🔧\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 150 mm \/ \u003cstrong\u003e6\" inch;\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 20 mm \/ \u003cstrong\u003e0.8\" inch;\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 3 mm \/\u003cstrong\u003e 0.12\" inch;\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrit (GOST 9206, μm):\u003c\/strong\u003e 100\/80, 80\/63, 50\/40, 28\/20 (\u003cstrong\u003eFEPA F\u003c\/strong\u003e: 150, 200, 240, 360);\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiamond Powder Brand:\u003c\/strong\u003e AC15.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTips for use: \u003c\/strong\u003e\u003cstrong\u003eUse water\u003c\/strong\u003e for work. During work, keep adding clean warm water when the bar dries and use a brush to remove residue and avoid salting. \u003cstrong\u003eDO NOT USE OIL!\u003c\/strong\u003e After sharpening, clean the bar and rinse in warm water. Store in a dry place.\u003c\/p\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45857381548203,"sku":"TS-SH2000940","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/01c843aa74ea62c193a5ef58b4af8342.jpg?v=1763534114"},{"product_id":"double-sided-sharpening-stone-s-50-40-20-14-100","title":"Venev Double-sided Diamond Sharpening Stone, 6\", (S), 50\/40-20\/14, 100%","description":"\u003c!-- more --\u003e\n\u003ch2 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003eVenev 50\/40 - 20\/14 Double Sided Diamond Bar\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eMade by Venev Industrial Diamonds Inc. Unlike other abrasive stones, diamond bars have a much slower wear rate, so using them with hard steels is recommended.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e6\" Stone Format - Works With Blitz, Kadet, Pioneer, K03 \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis 6\" long diamond bar can be used with all TSPROF and other sharpeners. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eGOST 50\/40 = FEPA F 250 | GOST 20\/14 = FEPA F 400\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eThe 50\/40 side \u003c\/strong\u003eis manufactured using the \u003cstrong\u003eB2-01 organic binder\u003c\/strong\u003e, which consists of phenol-formaldehyde resins and various compositions based on them. During hot pressing, these resins are transformed into a hard and strong substance that secures the cutting grains in the tool's working layer. This bond is designed to be strong and flexible, yet not too rigid. To increase its stiffness, manufacturer adds abrasive grinding powders like boron carbide.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eThe 20\/14 side\u003c\/strong\u003e is manufactured using an \u003cstrong\u003eadvanced OSB binder\u003c\/strong\u003e, which stands out by not incorporating boron carbide. Unlike other OSB bonds, the abrasive layer here is not sintered, but glued to the body of the metal plate. The absence of unnecessary inclusions of other abrasives allows softer and finer work.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eStraight out of the box, this bar is ready for use and does not require leveling with silicon carbide. The OSB bond is perfect for working with hard steels at shallow angles.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe sides are marked with the grit value according to the GOST scale.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"width: 49.2511%; height: 19.5833px;\"\u003e\n\u003cb data-mce-fragment=\"1\"\u003eSize\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e: \u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50.4416%; height: 19.5833px;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e150x24x11 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"width: 49.2511%; height: 19.5833px;\"\u003e\u003cb\u003e1st side\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.4416%; height: 19.5833px;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e50\/40 microns \/ FEPA F 250 grit\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"width: 49.2511%; height: 19.5833px;\"\u003e\n\u003cb data-mce-fragment=\"1\"\u003e2nd side\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e: \u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50.4416%; height: 19.5833px;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e20\/14 microns \/ FEPA F 400 grit\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"width: 49.2511%; height: 19.5833px;\"\u003e\n\u003cb data-mce-fragment=\"1\"\u003eDiamond powder concentration:\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50.4416%; height: 19.5833px;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e100%\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"width: 49.2511%; height: 19.5833px;\"\u003e\n\u003cb data-mce-fragment=\"1\"\u003eDiamond layer thickness:\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50.4416%; height: 19.5833px;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDue to production peculiarities, the width and length of the abrasive may deviate from the values specified in the description by up to 5%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommendations for work\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003eUse soapy water or oil. Working with oil keeps the process cleaner.\u003c\/p\u003e\n\u003cp\u003eWarning. These bars require careful work: do not apply pressure on the abrasive during sharpening (especially when sharpening the tip of the knife), do not allow the abrasive to come off the blade and do not allow the bar to fall on hard surfaces. \u003c\/p\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45857381843115,"sku":"TS-SH2001090","price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/21657bfae842f9078adaa2318689ba36.jpg?v=1763534123"},{"product_id":"set-of-diamond-sharpening-stones-veal-150-mm-3-pcs","title":"Set of diamond sharpening stones, VeAl, 150 mm (3 pcs)","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eSet of diamond sharpening stones, VeAl, 150 mm (3 pcs)\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond bars of Russian production from Venyevsky factory of diamond tools. Unlike abrasive stones, diamond stones wear much less, so it is recommended to work with hard steels. They are made on an organic bond.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eThe sides are marked with the value of grit on the GOST scale. Sharpening on diamond stones does not require special oil - it is enough to slightly moisten it with water. The set consists of 3 bars, with 100% concentration of diamond grains, it allows you to quickly and qualitatively perform almost the whole range of tasks on sharpening knives, starting from skinning operations, ending with the final polishing of the RK.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eThe set of diamond stones contains:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDouble-sided diamond bar, 150x24x12 mm, 160\/125 - 100\/80 µm, 100%, diamond layer thickness: 1 to 2 mm.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSide 160\/125 is made on organic bond B2-01. Organic binder consists of phenol-formaldehyde resins and various compositions based on them. Which, when hot pressed, are bakelized into a hard and sufficiently strong substance that holds the cutting grains in the working layer of the tool. At the same time, such a bond will be strong and ductile enough, but not stiff enough. To make it stiff, abrasive grinding powders, such as boron carbide, are added. The abrasive layer on this plate is not sintered, but glued to the body of the plate. Already out of the box such a bar is ready to work, it does not require leveling on silicon carbide.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSide 100\/80 is made on organic bond B1-10. Organic binder consists of phenol-formaldehyde resins and various compositions based on them. Which are hot-pressed bakelized into a hard and strong enough substance that holds the cutting grains in the working layer of the tool. At the same time, such a bond will be strong and ductile enough, but not stiff enough. To make it stiff, abrasive grinding powders, such as boron carbide, are added. The abrasive layer on this plate is not sintered, but glued to the body of the plate. Already out of the box such a bar is ready to work, it does not require leveling on silicon carbide.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDouble-sided diamond bar, 150x24x12 mm, 50\/40-20\/14 microns, 100%, thickness of diamond layer: from 1 to 2 mm.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSide 50\/40 is made on organic binder B2-01. The organic binder consists of phenol-formaldehyde resins and various compositions based on them. Which, when hot pressed, are bakelized into a hard and sufficiently strong substance that holds the cutting grains in the working layer of the tool. At the same time, such a bond will be strong and ductile enough, but not stiff enough. To make it rigid, abrasive grinding powders are added, for example, boron carbide.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSide 20\/14 is made on a new modernized OSB bond. The difference between the OSB bond and others is that it does not use boron carbide. In addition, the abrasive layer on it is not sintered, but glued to the body of the metal plate. The absence of unnecessary inclusions of other abrasives makes it possible to do softer and finer work. OSB bonding is ideal for hard steel on small corners.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDouble-sided diamond bar,150x24x12 mm, 10\/7-5\/3 microns, 100%,diamond layer thickness: 1 to 2 mm.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBoth sides of the bar are made on the new modernized OSB bond. The difference of OSB bond from others is that it does not use boron carbide. In addition, the abrasive layer on it is not sintered, but glued to the body of the metal plate. The absence of unnecessary inclusions of other abrasives makes it possible to do softer and finer work. OSB bonding is ideal for hard steel on small corners.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eCharacteristics of Diamond Bars:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eStone size:150x24x12 mm\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond powder concentration: 100%\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond layer thickness: 1 to 2 mm\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eOrganic bond\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBecause of the peculiarities of production, the width and length of the abrasive may have deviations from the values specified in the description up to 5%.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eRecommendations for work: sharpening should be done with soap foam or water. To clean the bar from salting, use water and a brush. Leveling to produce on glass with silicon carbide powder, to finish the bar use diamond paste.\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eAttention! Bar requires careful work: do not put pressure on the abrasive during sharpening (especially when sharpening the tip\/ankle of the knife), do not allow tearing off the plane of the blade and falling of the bar on a hard surface.\u003c\/h4\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894191874219,"sku":"TS-SH2201550","price":162.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/b34ce5ee_9c90_11ed_a451_0025903372b9_4d3e2e70_ab6f_11ed_a458_0025903372b9.webp?v=1764216188"},{"product_id":"veal-single-sided-diamond-grit-7-5-100-ms1","title":"VeAl single-sided diamond grit 7\/5 100% (MS1)","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eDiamond VeAl single-sided 7\/5 100% (MS1)\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond bar on a metal bond (copper-tin, MS-1 grade). Volumetric content of diamonds in the bar 100% with a uniform distribution throughout the volume. Working layer of abrasive 3,5 mm В±0,3 mm. The bond contains: diamond powder, copper, tin and silicon carbide filler. It is designed for sharpening knives made of any steel with hardness up to 70 HRC.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eThe 7\/5 sharpening stone is designed for finishing the cutting edge.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eCharacteristics:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eLength: 150 mm\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eWidth:25 mm\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eThickness: 7 mm\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBinding: MS-1\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eGrain: 7\/5 microns\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBecause of production peculiarities, the width and length of the abrasive may deviate from the values specified in the description by up to 5%.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eRecommendations for use: it is recommended to work with oil (coolant), it is also possible to work dry.\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eWARNING! Bar requires careful work: do not press on the abrasive during sharpening (especially when sharpening the tip\/ankle of the knife), do not allow to break off the plane of the blade and drop the bar on a hard surface.\u003c\/h4\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894192005291,"sku":"TS-SH2201780","price":71.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/af84d590_9b1b_11ed_a451_0025903372b9_45589c8d_ab6e_11ed_a458_0025903372b9.webp?v=1764216190"},{"product_id":"diamond-bar-with-three-layer-spraying-100-80","title":"Diamond bar with three-layer spraying 100\/80","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eDiamond bar with three-layer overlay 100\/80\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond bar 100\/80. Made on galvanic bond. Electroplated diamond stones provide intensive metal removal and can be used for knife cutting edges that have significant damage (chips, gouges, etc.). They work noticeably more aggressively than organic and metal-bonded bars with similar grain size. This is achieved due to protruding diamond grains, while in metal and organic bonds diamond grains are embedded in the binder and mixed with it. The bar contains triple diamond sputtering. The diamond layer is located on both sides of the plate, with the same grain size on each side. The concentration of diamonds in the layer is 100%. The geometry of the working plane on both sides is even, the bar does not need leveling, the diamond layer is opened during work.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eThe bar is designed for rough sharpening of knives.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eCharacteristics:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eLength:150 mm\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eWidth:20 mm\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eHeight:3 mm\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003ePowder granularity (microns):100\/80\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003ePowder grade: AC15\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eRecommendations for use: before starting work moisten the diamond layer of the bar with water. In the process of sharpening periodically rinse the diamond layer of clean warm water with a brush, do not allow salting. It is not intended to work with oil. After stopping work, clean off dirt, rinse in warm water. Store in a dry place.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBecause of the peculiarities of production, the width and length of the abrasive may have deviations from the values specified in the description up to 5%.\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eWARNING! Bar requires careful work: do not put pressure on the abrasive during sharpening (especially when sharpening the tip\/ankle of the knife), do not allow to break off the plane of the blade and drop the bar on a hard surface.\u003c\/h4\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894192038059,"sku":"TS-SH2000942","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/8ee26ecf_3961_11ed_a42c_0025903372b9_e5d47153_ab6f_11ed_a458_0025903372b9.webp?v=1764216191"},{"product_id":"diamond-veal-single-sided-diamond-bar-200-160-100-ms1","title":"Diamond VeAl single-sided diamond bar 200\/160 100% (MS1)","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eVeAl diamond bar 200\/160 100% single-sided (MS1)\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond bar on a metal bond (copper-tin, MS-1 grade). Volumetric content of diamonds in the bar 100% with a uniform distribution throughout the volume. Working layer of abrasive 3,5 mm В±0,3 mm. The bond contains: diamond powder, copper, tin and silicon carbide filler. It is designed for sharpening knives made of any steel with hardness up to 70 HRC.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBrush 200\/160 is designed for roughing and rough sharpening of the cutting edge.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eCharacteristics:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eLength: 150 mm\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eWidth: 25 mm\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eThickness:7 mm\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBinding: MS-1\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eGrain: 200\/160 microns\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBecause of manufacturing peculiarities, the width and length of the abrasive may deviate from the values specified in the description by up to 5%.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eRecommendations for use: it is recommended to work with oil (coolant), it is also possible to work dry.\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eWARNING! Bar requires careful work: do not press on the abrasive during sharpening (especially when sharpening the tip\/ankle of the knife), do not allow to break off the plane of the blade and drop the bar on a hard surface.\u003c\/h4\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894192070827,"sku":"TS-SH2201740","price":77.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/54091a09_9b1b_11ed_a451_0025903372b9_22ba776b_ab6f_11ed_a458_0025903372b9.webp?v=1764216192"},{"product_id":"diamond-veal-double-sided-diamond-bar-s-160-125-100-80-100","title":"Diamond VeAl double-sided diamond bar (S) 160\/125-100\/80 100%","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eVeAl double-sided diamond bar (S) 160\/125-100\/80 100%\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond bar of Russian production from Venyevsky factory of diamond tools. In contrast to abrasive stones, diamond stones wear much less, so it is recommended to work with hard steels. Suitable for the standard abrasive holder for the Blitz sharpener. Sharpening on diamond stones does not require any special oil - just lightly moisten with water.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDesigned for roughing and rough sharpening.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eCharacteristics:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eStone size: 150x24x12mm\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eGrain size 1 side: 160\/125 microns.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eGraininess 2 side: 100\/80 microns.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond powder concentration: 100%\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond layer thickness: 1 to 2 mm\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eOrganic bond\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBecause of the peculiarities of production, the width and length of the abrasive may have deviations from the values specified in the description up to 5%.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eRecommendations for work: sharpen with soap foam or water. To clean the bar from salting, use water and a brush. Leveling should be done on glass with silicon carbide powder, to finish the bar use diamond paste.\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eAttention! Bar requires careful work: do not press on the abrasive during sharpening (especially when sharpening the tip\/ankle of the knife), do not allow to break off the plane of the blade and fall the bar on a hard surface.\u003c\/h4\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894192136363,"sku":"TS-SH2201490","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/d31cb631_9b18_11ed_a451_0025903372b9_96daa752_ab6f_11ed_a458_0025903372b9.webp?v=1764216193"},{"product_id":"tsprof-f150-extra-coarse-diamond-plate","title":"TSPROF F150 Extra Coarse Diamond Plate","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eTSPROF F150 Extra Coarse Diamond Plate\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003eElectroplated diamond plates provide intensive metal removal and can be used for knife cutting edges that have significant damage (chips, gouges, etc.).\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond plate F150 Extra Coarse is used for rough roughing of the blade, when shaping the shape of the blade.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eWork noticeably more aggressive than bars on organic and metal bonds with a similar grain size. This is achieved by protruding diamond grains, while in metal and organic bonds diamond grains are recessed in the binder and mixed with it. The grain size concentration in the layer is 100%. At the same time, it should be noted that such stones will be inferior to other bonded stones in terms of work duration due to the thin layer of sputtering, which is actively erased in the process of sharpening.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eIt is also important to take into account that when working with such diamonds on soft steels, hardness up to 58 HRC, this type of bars is produced faster than when working on steels with high hardness.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eElectroplated diamond plates do not require preparation for work (leveling, \"cheering up\", etc.).\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive size: 4x25x150 mm\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eGrit: 150 grit (FEPA-F)\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBecause of production peculiarities, the width and length of the abrasive may deviate from the values specified in the description by up to 5%.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSignificant stains on the surface of the abrasive may occur, which do not affect the operation.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eRecommendations for use: plates work without the use of coolants and water.\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eWarning! Bar requires careful work: do not press on the abrasive during sharpening (especially when sharpening the tip\/ankle of the knife), do not allow to break off the plane of the blade and fall the bar on a hard surface.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eTechnostudio Profile:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\"Galvanic bonding is a method of sputtering in which diamond particles are attached to a coated base and a layer of metallic bonding is deposited from an electrolyte, covering and fixing the diamond grains. The method makes it possible to obtain diamond-containing coatings on complex shaped surfaces and to create thin (up to 0.4 mm) diamond-containing elements and coatings. Galvanic binder is characterized by the fact that it holds diamond grains only due to mechanical forces of adhesion, so the grains should be overgrown with binder to a height of at least 65-70% of the grain size. The metal that securely holds the abrasive grain on the steel body is nickel. It gives the tool high strength, durability and performance.\"\u003c\/p\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894192201899,"sku":"TS-SH1900600","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/bac3a5f7_08b2_11ed_a426_0025903372b9_b3d5db57_7551_11ed_a440_0025903372b9.webp?v=1764216195"},{"product_id":"veal-single-sided-diamond-grit-100-80-100-ms1","title":"VeAl single-sided diamond grit 100\/80 100% (MS1)","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eVeAl Diamond Brush 100\/80 100% (MS1)\u003c\/h2\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894192267435,"sku":"TS-SH2201750","price":71.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/665ac744_9b1b_11ed_a451_0025903372b9_fb151866_ab6e_11ed_a458_0025903372b9.webp?v=1764216196"},{"product_id":"tsprof-f1000-very-fine-diamond-plate","title":"TSPROF F1000 Very Fine Diamond Plate","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eTSPROF F1000 Very Fine diamond plate\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003eElectroplated diamond plates provide intensive metal removal and can be used for knife cutting edges that have significant damage (chips, gouges, etc.).\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond plate F1000 Very Fine is used for finishing the cutting edge.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eThey work noticeably more aggressively than organic and metal-bonded bars with similar grain size. This is achieved due to protruding diamond grains, while in metal and organic bonds diamond grains are recessed in the binder and mixed with it. The grain size concentration in the layer is 100%. At the same time, it should be noted that such stones will be inferior to other bonded stones in terms of work duration due to the thin layer of sputtering, which is actively erased in the process of sharpening.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eIt is also important to take into account that when working with such diamonds on soft steels, hardness up to 58 HRC, this type of bars is produced faster than when working on steels with high hardness.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eElectroplated diamond plates do not require preparation for work (leveling, \"cheering up\", etc.).\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive size: 4x25x150 mm\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eGrit: 1000 grit (FEPA-F)\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBecause of production peculiarities, the width and length of the abrasive may deviate from the values specified in the description by up to 5%.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSignificant stains on the surface of the abrasive may occur, not affecting operation.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eRecommendations for use: plates work without the use of coolants and water.\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eWARNING! Bar requires careful work: do not press on the abrasive during sharpening (especially when sharpening the tip\/ankle of the knife), do not allow to break off the plane of the blade and fall the bar on a hard surface.\u003c\/h4\u003e\n\u003cp style=\"text-align: center;\"\u003eTechnostudio Profile:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\"Galvanic bonding is a method of sputtering in which diamond particles are attached to a coated base and a layer of metallic bonding is deposited from an electrolyte, covering and fixing the diamond grains. The method makes it possible to obtain diamond-containing coatings on complex shaped surfaces and to create thin (up to 0.4 mm) diamond-containing elements and coatings. Galvanic binder is characterized by the fact that it holds diamond grains only due to mechanical forces of adhesion, so the grains should be overgrown with binder to a height of at least 65-70% of the grain size. The metal that securely holds the abrasive grain on the steel body is nickel. It gives the tool high strength, durability and performance.\"\u003c\/p\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894192300203,"sku":"TS-SH1900640","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/e8fc4d7e_08b2_11ed_a426_0025903372b9_29606d4a_7552_11ed_a440_0025903372b9.webp?v=1764216197"},{"product_id":"veal-single-sided-diamond-grit-20-14-100-ms1","title":"VeAl single-sided diamond grit 20\/14 100% (MS1)","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eVeAl diamond bar single-sided 20\/14 100% (MS1)\u003c\/h2\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894192332971,"sku":"TS-SH2201770","price":71.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/9d489e9c_9b1b_11ed_a451_0025903372b9_be5c6a4d_ab6e_11ed_a458_0025903372b9.webp?v=1764216198"},{"product_id":"diamond-veal-single-sided-diamond-block-50-40-100-ms1","title":"Diamond VeAl single-sided diamond block 50\/40 100% (MS1)","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eDiamond VeAl single-sided 50\/40 100% (MS1)\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond bar on a metal bond (copper-tin, MS-1 grade). Volumetric content of diamonds in the bar 100% with a uniform distribution throughout the volume. Working layer of abrasive 3,5 mm В±0,3 mm. The bond contains: diamond powder, copper, tin and silicon carbide filler. It is designed for sharpening knives made of any steel with hardness up to 70 HRC.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eThe 50\/40 sharpening stone is designed for basic sharpening of the cutting edge.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eCharacteristics:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eLength: 150 mm\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eWidth: 25 mm\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eThickness: 7 mm\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBinding: MS-1\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eGrain: 50\/40 microns\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBecause of production peculiarities, the width and length of the abrasive may deviate from the values specified in the description by up to 5%.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eRecommendations for use: it is recommended to work with oil (coolant), it is also possible to work dry.\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eWARNING! Bar requires careful work: do not put pressure on the abrasive during sharpening (especially when sharpening the tip\/ankle of the knife), do not allow to break off the plane of the blade and drop the bar on a hard surface.\u003c\/h4\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894192398507,"sku":"TS-SH2201760","price":71.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/93112fe3_9b1b_11ed_a451_0025903372b9_e178aa19_ab6e_11ed_a458_0025903372b9.webp?v=1764216199"},{"product_id":"tsprof-f400-medium-diamond-insert","title":"TSPROF F400 Medium diamond insert","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eDiamond plate TSPROF F400 Medium\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003eElectroplated diamond plates provide intensive metal removal and can be used for knife cutting edges that have significant damage (chips, gouges, etc.).\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond plate F400 Medium is used for basic sharpening operations and creating an aggressive cut.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eWork noticeably more aggressively than organic and metal bonded bars with similar grain size. This is achieved by protruding diamond grains, while in metal and organic bonds diamond grains are recessed in the binder and mixed with it. The grain size concentration in the layer is 100%. At the same time, it should be noted that such stones will be inferior to other bonded stones in terms of work duration due to the thin layer of sputtering, which is actively erased in the process of sharpening.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eIt is also important to take into account that when working with such diamonds on soft steels, hardness up to 58 HRC, this type of bars is produced faster than when working on steels with high hardness.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eElectroplated diamond plates do not require preparation for work (leveling, \"cheering up\", etc.).\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive size: 4x25x150 mm\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eGritGrit: 400 grit (FEPA-F)\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBecause of production peculiarities, the width and length of the abrasive may deviate from the values specified in the description by up to 5%.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSignificant stains on the surface of the abrasive may occur, which do not affect the operation.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eRecommendations for use:plates work without the use of coolants and water.\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eWarning! Bar requires careful work: do not press on the abrasive during sharpening (especially when sharpening the tip\/ankle of the knife), do not allow to break off the plane of the blade and fall the bar on a hard surface.\u003c\/h4\u003e\n\u003cp style=\"text-align: center;\"\u003eTechnostudio Profile:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\"Galvanic bonding is a method of sputtering in which diamond particles are attached to a coated base and a layer of metallic bonding is deposited from an electrolyte, covering and fixing the diamond grains. The method makes it possible to obtain diamond-containing coatings on complex shaped surfaces and to create thin (up to 0.4 mm) diamond-containing elements and coatings. Galvanic binder is characterized by the fact that it holds diamond grains only due to mechanical forces of adhesion, so the grains should be overgrown with binder to a height of at least 65-70% of the grain size. The metal that securely holds the abrasive grain on the steel body is nickel. It gives the tool high strength, durability and performance.\"\u003c\/p\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894192431275,"sku":"TS-SH1900620","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/fb0d98a7_08b2_11ed_a426_0025903372b9_1579731f_7552_11ed_a440_0025903372b9.webp?v=1764216200"},{"product_id":"tsprof-f220-coarse-diamond-plate","title":"TSPROF F220 Coarse Diamond Plate","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eTSPROF F220 Coarse diamond plate\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003eElectroplated diamond plates provide intensive metal removal and can be used for knife cutting edges that have significant damage (chips, gouges, etc.).\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond plate F220 Coarse is used for shaping the cutting edge.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eThey work noticeably more aggressively than bars on organic and metal bonds with similar grain size. This is achieved due to protruding diamond grains, while in metal and organic binder diamond grains are recessed in the binder and mixed with it. The grain size concentration in the layer is 100%. At the same time, it should be noted that such stones will be inferior to other bonded stones in terms of work duration due to the thin layer of sputtering, which is actively erased in the process of sharpening.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eIt is also important to take into account that when working with such diamonds on soft steels, hardness up to 58 HRC, this type of bars is produced faster than when working on steels with high hardness.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eElectroplated diamond plates do not require preparation for work (leveling, \"cheering up\", etc.).\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive size: 4x25x150 mm\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eGritGrit: 220 grit (FEPA-F)\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBecause of production peculiarities, abrasive width and length may have deviations from the values specified in the description up to 5%.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSignificant stains on the surface of the abrasive may occur, which do not affect the operation.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eRecommendations for use:plates work without the use of coolants and water.\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eWarning! Bar requires careful work: do not press on the abrasive during sharpening (especially when sharpening the tip\/ankle of the knife), do not allow to break off the plane of the blade and fall the bar on a hard surface.\u003c\/h4\u003e\n\u003cp style=\"text-align: center;\"\u003eTechnostudio Profile:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\"Galvanic bonding is a method of sputtering in which diamond particles are attached to a coated base and a layer of metallic bonding is deposited from an electrolyte, covering and fixing the diamond grains. The method makes it possible to obtain diamond-containing coatings on complex shaped surfaces and to create thin (up to 0.4 mm) diamond-containing elements and coatings. Galvanic binder is characterized by the fact that it holds diamond grains only due to mechanical forces of adhesion, so the grains should be overgrown with binder to a height of at least 65-70% of the grain size. The metal that securely holds the abrasive grain on the steel body is nickel. It gives the tool high strength, durability and performance.\"\u003c\/p\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894192464043,"sku":"TS-SH1900610","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/c9f8fe88_08b2_11ed_a426_0025903372b9_eb78dcbf_7551_11ed_a440_0025903372b9.webp?v=1764216201"},{"product_id":"tsprof-f600-fine-diamond-plate","title":"TSPROF F600 Fine Diamond Plate","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eDiamond plate TSPROF F600 Fine\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003eElectroplated diamond plates provide intensive metal removal and can be used for knife cutting edges with significant damage (chips, gouges, etc.).\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond plate F600 Fine is used for pre-finishing of the cutting edge, removes noticeable risks from sharpening.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eWork noticeably more aggressive than bars on organic and metal bonds with a similar grain size. This is achieved due to protruding diamond grains, while in metal and organic bonds diamond grains are recessed in the binder and mixed with it. The grain size concentration in the layer is 100%. At the same time, it should be noted that such stones will be inferior to other bonded stones in terms of work duration due to the thin layer of sputtering, which is actively erased in the process of sharpening.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eIt is also important to take into account that when working with such diamonds on soft steels, hardness up to 58 HRC, this type of bars is produced faster than when working on steels with high hardness.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eElectroplated diamond plates do not require preparation for work (leveling, \"cheering up\", etc.).\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive size: 4x25x150 mm\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eGritGrit: 600 grit (FEPA-F)\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBecause of production peculiarities, the width and length of the abrasive may deviate from the values specified in the description by up to 5%.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSignificant stains on the surface of the abrasive may occur, not affecting operation.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eRecommendations for use: the plates work without the use of coolants and water.\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eWarning! Bar requires careful work: do not press on the abrasive during sharpening (especially when sharpening the tip\/ankle of the knife), do not allow to break off the plane of the blade and fall the bar on a hard surface.\u003c\/h4\u003e\n\u003cp style=\"text-align: center;\"\u003eTechnostudio Profile:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\"Galvanic bonding is a method of sputtering in which diamond particles are attached to a coated base and a layer of metallic bonding is deposited from an electrolyte, covering and fixing the diamond grains. The method makes it possible to obtain diamond-containing coatings on complex shaped surfaces and to create thin (up to 0.4 mm) diamond-containing elements and coatings. Galvanic binder is characterized by the fact that it holds diamond grains only due to mechanical forces of adhesion, so the grains should be overgrown with binder to a height of at least 65-70% of the grain size. The metal that securely holds the abrasive grain on the steel body is nickel. It gives the tool high strength, durability and performance.\"\u003c\/p\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894192529579,"sku":"TS-SH1900630","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/d9b3def2_08b2_11ed_a426_0025903372b9_06b42b07_7552_11ed_a440_0025903372b9.webp?v=1764216202"},{"product_id":"natural-diamond-100-grit-200-160-12-5-karat-veal-single-sided-diamond-block-150x","title":"Natural diamond 100 Grit (200\/160), 12.5 karat, VeAl single-sided diamond block 150x25x6 25%","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eNatural diamond sharpening stone.\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003eThe 200\/160 100 grit is designed for skinning work with a cutting edge.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eApplicability:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eVenus diamond stones are suitable for all types of steel.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBars should be used for sharpening knives, axes, scissors, razors, chisels and other cutting tools.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eLubricating and cooling liquid:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eIt is recommended to use water, soap solution, water with cleaning agent as a coolant.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBar Maintenance:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eLevelling, dressing, cheering up™ of Venevka bars is done with silicon carbide.\u003c\/p\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894195708075,"sku":"405010X10211","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/200-160.png?v=1764216265"},{"product_id":"natural-diamond-150-grit-100-80-12-5-karat-veal-single-sided-diamond-block-150-2","title":"Natural diamond 150 Grit (100\/80), 12.5 karat, VeAl single-sided diamond block 150x25x6mm 25%","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eNatural diamond sharpening stone.\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003eThe 100\/80 150grit is designed for skinning work with a cutting edge.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eApplicability:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eVenus diamond stones are suitable for all types of steel.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBars should be used for sharpening knives, axes, scissors, razors, chisels and other cutting tools.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eLubricating and cooling liquid:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eIt is recommended to use water, soap solution, water with cleaning agent as a coolant.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBar Maintenance:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eLevelling, dressing, cheering up™ of Venevka bars is done with silicon carbide.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSingle-sided diamond bar for sharpening the cutting edge.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSize: 150x25x6 mm.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eGrit: 100\/80 microns, 150 Grit\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive concentration: 25%\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBond grade: B2-01\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond powder grade: AC4, AC6\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive: Diamond\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond layer thickness: 3 mm\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBrand: Venev Industrial Diamonds\u003c\/p\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894195740843,"sku":"405010X20511","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/100-80-25-3.jpg?v=1764216266"},{"product_id":"natural-diamond-360-grit-50-40-12-5-karat-veal-single-sided-diamond-block-150-25","title":"Natural diamond 360 Grit (50\/40), 12.5 karat, VeAl single-sided diamond block 150x25x6mm 25%","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eNatural diamond sharpening stone.\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003eThe 50\/40 360 grit is for sharpening the cutting edge.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eApplicability:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eVenus diamond stones are suitable for all types of steel.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBars should be used for sharpening knives, axes, scissors, razors, chisels and other cutting tools.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eLubricating and cooling liquid:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eIt is recommended to use water, soap solution, water with cleaning agent as a coolant.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBar Maintenance:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eLevelling, dressing, cheering up™ of Venevka bars is done with silicon carbide.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSingle-sided diamond bar for sharpening the cutting edge.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSize: 150x25x6 mm.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eGrit: 50\/40, 360 Grit\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive concentration: 25%\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBond grade: B2-01\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond powder grade: AC4, AC6\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive: Diamond\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond layer thickness: 3 mm\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eBrand: Venev Industrial Diamonds\u003c\/h4\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894195773611,"sku":"405010X10811","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/100-80-25-3_26f62c0a-68f4-442f-8224-7f4ade2fbcbc.jpg?v=1764216266"},{"product_id":"natural-diamond-1000-grit-20-14-12-5-karat-veal-single-sided-diamond-block-150-2","title":"Natural diamond 1000 Grit (20\/14), 12.5 karat VeAl single-sided diamond block 150x25x6mm 25%","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eNatural diamond sharpening stone.\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003eThe 20\/14, 1000 Grit grit is for sharpening the cutting edge.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eApplicability:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eVenus diamond stones are suitable for all types of steel.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBars should be used for sharpening knives, axes, scissors, razors, chisels and other cutting tools.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eLubricating and cooling liquid:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eIt is recommended to use water, soap solution, water with cleaning agent as a coolant.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBar Maintenance:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eLevelling, dressing, cheering up™ of Venevka bars is done with silicon carbide.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSingle-sided diamond bar for sharpening the cutting edge.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSize: 150x25x6 mm.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eGrit: 20\/14, 1000 Grit\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive concentration: 25%\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBond grade: B2-01\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond powder grade: AC4, AC6\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive: Diamond\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond layer thickness: 3 mm\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eBrand: Venev Industrial Diamonds\u003c\/h4\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894195806379,"sku":"405010X30411","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/100-80-25-3_ab393c98-7e0a-4ac4-8f8f-1167a681f81e.jpg?v=1764216267"},{"product_id":"natural-diamond-5000-grit-7-5-12-5-karat-veal-single-sided-diamond-block-150-25","title":"Natural diamond 5000 Grit (7\/5), 12.5 karat VeAl single-sided diamond block 150x25x6mm 25%","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eNatural diamond sharpening stone.\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003eThe 7\/5, 5000 Grit grit is for sharpening the cutting edge.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eApplicability:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eVenus diamond stones are suitable for all types of steel.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBars should be used for sharpening knives, axes, scissors, razors, chisels and other cutting tools.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eLubricating and cooling liquid:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eIt is recommended to use water, soap solution, water with cleaning agent as a coolant.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBar Maintenance:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eLevelling, dressing, cheering up™ of Venevka bars is done with silicon carbide.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSingle-sided diamond bar for sharpening the cutting edge.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSize: 150x25x6 mm.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eGrit: 7\/5, 5000 Grit\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive concentration: 25%\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBond grade: B2-01\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond powder grade: AC4, AC6\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive: Diamond\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond layer thickness: 3 mm\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eBrand: Venev Industrial Diamonds\u003c\/h4\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894195839147,"sku":"405010X30711","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/100-80-25-3_42bcba5a-32f6-49ba-9982-5d7d9981a320.jpg?v=1764216268"},{"product_id":"natural-diamond-8000-grit-3-2-12-5-karat-veal-single-sided-diamond-block-150-25","title":"Natural diamond 8000 Grit (3\/2), 12.5 karat VeAl single-sided diamond block 150x25x6mm 25%","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eNatural diamond sharpening stone.\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003eThe 3\/2, 8000 Grit Single-sided diamond bar for polishing the cutting edge.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eApplicability:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eVenus diamond stones are suitable for all types of steel.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBars should be used for sharpening knives, axes, scissors, razors, chisels and other cutting tools.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eLubricating and cooling liquid:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eIt is recommended to use water, soap solution, water with cleaning agent as a coolant.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBar Maintenance:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eLevelling, dressing, cheering up™ of Venevka bars is done with silicon carbide.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSingle-sided diamond bar for sharpening the cutting edge.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSize: 150x25x6 mm.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eGrit: 3\/2, 8000 Grit\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive concentration: 25%\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBond grade: B2-01\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond powder grade: AC4, AC6\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive: Diamond\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond layer thickness: 3 mm\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eBrand: Venev Industrial Diamonds\u003c\/h4\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894195871915,"sku":"405010X30911","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/100-80-25-3_7a8221f9-e00a-4053-81d8-d12140812fa9.jpg?v=1764216269"},{"product_id":"natural-diamond-veal-single-sided-diamond-block-150-25-6x3-1-0-15000-grit-25","title":"Natural diamond VeAl single-sided diamond block 150x25x6mm 1\/0 (15000 Grit) 25%","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eNatural diamond sharpening stone.\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003eThe 1\/0, 15000 Grit Single-sided diamond bar for polishing the cutting edge.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eApplicability:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eVenus diamond stones are suitable for all types of steel.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBars should be used for sharpening knives, axes, scissors, razors, chisels and other cutting tools.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eLubricating and cooling liquid:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eIt is recommended to use water, soap solution, water with cleaning agent as a coolant.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBar Maintenance:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eLevelling, dressing, cheering up™ of Venevka bars is done with silicon carbide.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSingle-sided diamond bar for sharpening the cutting edge.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSize: 150x25x6 mm.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eGrit: 1\/0, 15000 Grit\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive concentration: 25%\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBond grade: B2-01\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond powder grade: AC4, AC6\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive: Diamond\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond layer thickness: 3 mm\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eBrand: Venev Industrial Diamonds\u003c\/h4\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894195904683,"sku":"405010X31111","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/100-80-25-3_35f6d93a-6fe5-4256-8568-869493b1c615.jpg?v=1764216269"},{"product_id":"natural-diamond-100-grit-200-160-50-karat-single-sided-b2-01-diamond-block-veal","title":"Natural diamond 100 Grit (200\/160) 50 karat, single-sided: B2-01, diamond block  VeAl 150x25x6mm,100%","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eNatural diamond sharpening stone.\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003eThe 200\/160 (100 Grit)\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eIntroducing the 150x25x7x3mm 200\/160 (100Grit) Copper-Tin 100% diamond grit. With this abrasive you can easily shape a burr and move on to the next abrasive. Due to the high concentration of the abrasive, it provides durability and excellent performance. Our bar is suitable for all types of steel, making it a versatile solution for any cook or professional.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eApplicability:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eVenus diamond stones are suitable for all types of steel.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBars should be used for sharpening knives, axes, scissors, razors, chisels and other cutting tools.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eLubricating and cooling liquid:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eIt is recommended to use water, soap solution, water with cleaning agent as a coolant.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBar Maintenance:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eLevelling, dressing, cheering up™ of Venevka bars is done with silicon carbide.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSingle-sided diamond bar for sharpening the cutting edge.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSize: 150x25x6 mm.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eGrit: 200\/160 (100 Grit)\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive concentration: 100%\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBond grade: B2-01\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond powder grade: AC4, AC6\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive: Diamond\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond layer thickness: 3 mm\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eBrand: Venev Industrial Diamonds\u003c\/h4\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894195937451,"sku":"405010X10214","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/200-160-1.png?v=1764216270"},{"product_id":"natural-diamond-150-grit-100-80-50-karat-single-sided-b2-01-diamond-block-veal-1","title":"Natural diamond 150 Grit (100\/80), 50 karat, single -sided: B2-01, diamond block VeAl 150x25x6mm 100%","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eNatural diamond sharpening stone.\u003c\/h2\u003e\n\u003ch4 style=\"text-align: center;\"\u003eThe 100\/80 (150 Grit)\u003c\/h4\u003e\n\u003cp style=\"text-align: center;\"\u003eGet unrivaled precision and efficiency with our single-sided diamond cutting edge sharpening bar. This innovative tool delivers fast, flawless sharpening so your work is always top-notch. What makes this sharpening stone special? Firstly, it is manufactured in a factory in Russia, which guarantees high quality and reliability. Our team of experienced technologists carefully controls every stage of production to provide you with the best product. Secondly, we used copper-tin binder to create these bars. This allows for optimum rigidity and durability in handling different materials. You can be assured of the durability of this tool. Our single-sided diamond bar is not only a functional solution for your cutting edge sharpening task; it is also a stylish accessory for any craftsman or professional. Its compact size and ergonomic shape make it easy to use. So don't waste time looking for other tools - choose our single sided diamond cutting edge sharpening bar. Fast, reliable and made with love in Russia. Get maximum precision today!\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eApplicability:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eVenus diamond stones are suitable for all types of steel.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBars should be used for sharpening knives, axes, scissors, razors, chisels and other cutting tools.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eLubricating and cooling liquid:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eIt is recommended to use water, soap solution, water with cleaning agent as a coolant.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBar Maintenance:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eLevelling, dressing, cheering up™ of Venevka bars is done with silicon carbide.\u003c\/p\u003e\n\u003cblockquote\u003e\n\u003cp style=\"text-align: center;\"\u003eSingle-sided diamond bar for sharpening the cutting edge.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSize: 150x25x6 mm.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eGrit: 100\/80 (150 Grit)\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive concentration: 100%\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBond grade: B2-01\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond powder grade: AC4, AC6\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive: Diamond\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond layer thickness: 3 mm\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003ch4 style=\"text-align: center;\"\u003eBrand: Venev Industrial Diamonds\u003c\/h4\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894195970219,"sku":"405010X10514","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/200-160-1_b2d7b15e-185d-455d-87cb-042ea7ce2459.png?v=1764216271"},{"product_id":"natural-diamond-360-grit-50-40-50-karat-veal-single-sided-diamond-block-150x25x6","title":"Natural diamond 360 Grit (50\/40), 50 karat, VeAl single-sided diamond block 150x25x6mm 100%","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eNatural diamond sharpening stone.\u003c\/h2\u003e\n\u003ch3 style=\"text-align: center;\"\u003eThe 50\/40 (360 Grit) 100%\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eGet unrivaled precision and efficiency with our single-sided diamond cutting edge sharpening bar. This innovative tool delivers fast, flawless sharpening so your work is always top-notch. What makes this sharpening stone special? Firstly, it is manufactured in a factory in Russia, which guarantees high quality and reliability. Our team of experienced technologists carefully controls every stage of production to provide you with the best product. Secondly, we used copper-tin binder to create these bars. This allows for optimum rigidity and durability in handling different materials. You can be assured of the durability of this tool. Our single-sided diamond bar is not only a functional solution for your cutting edge sharpening task; it is also a stylish accessory for any craftsman or professional. Its compact size and ergonomic shape make it easy to use. So don't waste time looking for other tools - choose our single sided diamond cutting edge sharpening bar. Fast, reliable and made with love in Russia. Get maximum precision today!\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eApplicability:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eVenus diamond stones are suitable for all types of steel.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBars should be used for sharpening knives, axes, scissors, razors, chisels and other cutting tools.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eLubricating and cooling liquid:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eIt is recommended to use water, soap solution, water with cleaning agent as a coolant.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBar Maintenance:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eLevelling, dressing, cheering up™ of Venevka bars is done with silicon carbide.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSingle-sided diamond bar for sharpening the cutting edge.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSize: 150x25x6 mm.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eGrit: 50\/40 (360 Grit) 100%\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive concentration: 100%\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBond grade: B2-01\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond powder grade: AC4, AC6\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive: Diamond\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond layer thickness: 3 mm\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eBrand: Venev Industrial Diamonds\u003c\/h4\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894196002987,"sku":"405010X10814","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/100-80-25-3_da646943-485a-4a33-873e-1fca5d72500f.jpg?v=1764216271"},{"product_id":"natural-diamonds-1000-grit-20-14-50-karat-b2-01-single-sided-diamondveal-150-25","title":"Natural diamonds 1000 Grit (20\/14), 50 karat, B2-01, single-sided diamond VeAl 150x25x6mm 100%","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eNatural diamond sharpening stone.\u003c\/h2\u003e\n\u003ch3 style=\"text-align: center;\"\u003eThe 20\/14 (1000 Grit) 100%\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eGet unrivaled precision and efficiency with our single-sided diamond cutting edge sharpening bar. This innovative tool delivers fast, flawless sharpening so your work is always top-notch. What makes this sharpening stone special? Firstly, it is manufactured in a factory in Russia, which guarantees high quality and reliability. Our team of experienced technologists carefully controls every stage of production to provide you with the best product. Secondly, we used copper-tin binder to create these bars. This allows for optimum rigidity and durability in handling different materials. You can be assured of the durability of this tool. Our single-sided diamond bar is not only a functional solution for your cutting edge sharpening task; it is also a stylish accessory for any craftsman or professional. Its compact size and ergonomic shape make it easy to use. So don't waste time looking for other tools - choose our single sided diamond cutting edge sharpening bar. Fast, reliable and made with love in Russia. Get maximum precision today!\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eApplicability:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eVenus diamond stones are suitable for all types of steel.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBars should be used for sharpening knives, axes, scissors, razors, chisels and other cutting tools.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eLubricating and cooling liquid:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eIt is recommended to use water, soap solution, water with cleaning agent as a coolant.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBar Maintenance:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eLevelling, dressing, ‘cheering up’ of Venevka bars is done with silicon carbide.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSingle-sided diamond bar for sharpening the cutting edge.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSize: 150x25x6 mm.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eGrit: 20\/14 (1000 Grit) 100%\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive concentration: 100%\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBond grade: B2-01\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond powder grade: ACM\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive: Diamond\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond layer thickness: 3 mm\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eBrand: Venev Industrial Diamonds\u003c\/h4\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894196068523,"sku":"405010X30414","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/200-160-1_11929643-0dfd-4425-b98b-56979026f540.png?v=1764216272"},{"product_id":"natural-diamonds-5000-grit-7-5-50-karat-b2-01-single-sided-diamond-block-veal-15","title":"Natural diamonds 5000 Grit (7\/5), 50 karat: B2-01, single-sided diamond block VeAl 150x25x6mm, 100%","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eNatural diamond sharpening stone.\u003c\/h2\u003e\n\u003ch3 style=\"text-align: center;\"\u003eThe 7\/5 (5000 Grit) 100%\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eGet unrivaled precision and efficiency with our single-sided diamond sharpening bar. This innovative tool delivers fast, flawless sharpening so your work is always top-notch. What makes this sharpening stone special? Firstly, it is manufactured in a factory in Russia, which guarantees high quality and reliability. Our team of experienced technologists carefully controls every stage of production to provide you with the best product. Secondly, we used copper-tin binder to create these bars. This allows for optimum rigidity and durability in handling different materials. You can be assured of the durability of this tool. Our single-sided diamond bar is not only a functional solution for your cutting edge sharpening task; it is also a stylish accessory for any craftsman or professional. Its compact size and ergonomic shape make it easy to use. So don't waste time looking for other tools - choose our single sided diamond cutting edge sharpening bar. Fast, reliable and made with love in Russia. Get maximum precision today!\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eApplicability:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eVenus diamond stones are suitable for all types of steel.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBars should be used for sharpening knives, axes, scissors, razors, chisels and other cutting tools.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eLubricating and cooling liquid:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eIt is recommended to use water, soap solution, water with cleaning agent as a coolant.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBar Maintenance:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eLevelling, dressing, cheering up™ of Venevka bars is done with silicon carbide.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSize: 150x25x6 mm.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eGrit: 7\/5 (5000 Grit) 100%\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive concentration: 100%\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBond grade: B2-01\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond powder grade: ACM\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive: Diamond\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond layer thickness: 3 mm\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eBrand: Venev Industrial Diamonds\u003c\/h4\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894196101291,"sku":"405010X30714","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/200-160-1_a8279d4c-6953-4f44-84cf-4020ec2c72ac.png?v=1764216273"},{"product_id":"natural-diamond-8000-grit-3-2-50-karat-veal-single-sided-diamond-block-150-25-6","title":"Natural diamond 8000 Grit (3\/2), 50 karat VeAl single-sided diamond block 150x25x6mm Copper-tin 100%","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eNatural diamond sharpening stone.\u003c\/h2\u003e\n\u003ch3 style=\"text-align: center;\"\u003eThe 3\/2 (8000 Grit) 100%\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eGet unrivaled precision and efficiency with our single-sided diamond sharpening bar. This innovative tool delivers fast, flawless sharpening so your work is always top-notch. What makes this sharpening stone special? Firstly, it is manufactured in a factory in Russia, which guarantees high quality and reliability. Our team of experienced technologists carefully controls every stage of production to provide you with the best product. Secondly, we used copper-tin binder to create these bars. This allows for optimum rigidity and durability in handling different materials. You can be assured of the durability of this tool. Our single-sided diamond bar is not only a functional solution for your cutting edge sharpening task; it is also a stylish accessory for any craftsman or professional. Its compact size and ergonomic shape make it easy to use. So don't waste time looking for other tools - choose our single sided diamond cutting edge sharpening bar. Fast, reliable and made with love in Russia. Get maximum precision today!\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eApplicability:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eVenus diamond stones are suitable for all types of steel.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBars should be used for sharpening knives, axes, scissors, razors, chisels and other cutting tools.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eLubricating and cooling liquid:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eIt is recommended to use water, soap solution, water with cleaning agent as a coolant.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBar Maintenance:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eLevelling, dressing, cheering up™ of Venevka bars is done with silicon carbide.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSingle-sided diamond bar for sharpening the cutting edge.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSize: 150x25x6 mm.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eGrit: 3\/2 (8000 Grit) 100%\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive concentration: 100%\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBond grade: B2-01\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond powder grade: ACM\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive: Diamond\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond layer thickness: 3 mm\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eBrand: Venev Industrial Diamonds\u003c\/h4\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894196134059,"sku":"405010РX30914","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/100-80-25-3_b4da2bcf-fa45-4228-8fe6-8d92b381bc80.jpg?v=1764216273"},{"product_id":"natural-diamond-15000-grit-1-0-50-karat-veal-single-sided-diamond-block-150-25-6","title":"Natural diamond 15000 Grit (1\/0), 50 karat, VeAl single-sided diamond block 150x25x6 100%","description":"\u003cp\u003e\u003c!-- more --\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: center;\"\u003eNatural diamond sharpening stone.\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\"\u003eThe 1\/0 (15000 Grit) 100%\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eGet unrivaled precision and efficiency with our single-sided diamond sharpening bar. This innovative tool delivers fast, flawless sharpening so your work is always top-notch. What makes this sharpening stone special? Firstly, it is manufactured in a factory in Russia, which guarantees high quality and reliability. Our team of experienced technologists carefully controls every stage of production to provide you with the best product. Secondly, we used copper-tin binder to create these bars. This allows for optimum rigidity and durability in handling different materials. You can be assured of the durability of this tool. Our single-sided diamond bar is not only a functional solution for your cutting edge sharpening task; it is also a stylish accessory for any craftsman or professional. Its compact size and ergonomic shape make it easy to use. So don't waste time looking for other tools - choose our single sided diamond cutting edge sharpening bar. Fast, reliable and made with love in Russia. Get maximum precision today!\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eApplicability:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eVenus diamond stones are suitable for all types of steel.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBars should be used for sharpening knives, axes, scissors, razors, chisels and other cutting tools.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eLubricating and cooling liquid:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eIt is recommended to use water, soap solution, water with cleaning agent as a coolant.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eBar Maintenance:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003eLevelling, dressing, cheering up™ of Venevka bars is done with silicon carbide.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSingle-sided diamond bar for sharpening the cutting edge.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSize: 150x25x6 mm.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eGrit: 1\/0 (15000 Grit) 100%\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive concentration: 100%\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBond grade: B2-01\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond powder grade: ACM\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eAbrasive: Diamond\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eDiamond layer thickness: 3 mm\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eBrand: Venev Industrial Diamonds\u003c\/h4\u003e","brand":"TSPROF","offers":[{"title":"Default Title","offer_id":45894196166827,"sku":"405010X31114","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/files\/100-80-25-3_8d9cb8a2-3b8f-4808-ab40-647644551d00.jpg?v=1764216274"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/7859\/3963\/collections\/Other_diamond_stones.webp?v=1763535926","url":"https:\/\/tsprof.asia\/collections\/other-diamond-stones\/product-type_abrasives.oembed","provider":"TSPROF Asia","version":"1.0","type":"link"}